SMART-2097A intelligent portable multi-frequency eddy current tester, which is
designed with DSP digital processing technique, real-time multi-frequency ET
technique and microprocessor technique, can efficiently detect defection of metal
material, sorting various alloys or conditions of heat-treatment, and measure
change of thickness. The user can preset desired programs and parameters, and
then operate with man-machine conversation, hints of menu, and hot-key. The
product is small size, light weight, portable, and the built-in rechargeable
lithium-battery can be used at local test where there’s no power supply.
Specification:
● Owns all functions of SMART-97;
● 2 independent frequencies (can be expanded to 8);
● 3 automatically mixing units;
● Range of frequencies: 64Hz-5MHz;
● High-speed accuracy / digital electronic balancing;
● Gain: 0-90dB (step: 0.5dB);
● Digital filter of each-channel: High pass: 0~500 Hz Low pass: 10Hz~10KHz
● Automatically/manually measure amplitude and phase;
● Unique non-equal phase/amplitude alarm;
● Exciting voltage of probe can be adjusted by keyboard;
● Display two-trace impedance plane and a stripe curve;
● C-scan display;
● EL or TFT-LCD display panel 5.7” 115.2 (H) x 86.4 (V)
● Range of operating temperature: -20℃-+60℃;
● Power supply: lithium battery working length ≥9 h
● External power supply: AC 220V;
● To be fitted with rotary drive for hole probe .
● Weight: 2.15 Kg
Standard Configuration:
Main Body
|
1 set
|
Probe
|
1 set
|
Cable
|
1 Set
|
Operation Manual
|
1 piece
|
Suitcase
|
1 piece
|
Power adapter
|
1 set
|
SMART-2097A can be used to: ①common defect evaluation (i.e. surface test of
airplane’s blade wheel hub and aircraft landing gear etc.);②Detect defects of
inner side of rivet/bolt hole while without taking apart the holes or fasteners;
③Defect detection of metal parts and ferromagnetic welding surface; ④Measure
change of thin-plate’s thickness (i.e. wear corrosion and mechanical wear);
⑤Thickness measurement of non-conductive coating/plating on conductor;
⑥Detect in-service tube of non-ferromagnetic heat-exchanger with material of
copper Ti Al Zr (defects includes: crack wall thickness corrosion); ⑦Test
corrosion of composite layer for example to detect multi-layer structure of
airplane joint of fuselage-wing; ⑧monitor change of heat-treatment conditions
and sorting material. Besides the equipment has optional functions of detecting
weld with anti-corrosion coating measuring depth of crack and function of
measuring electronic conductivity.