Measuring range：0~1250μm
Precision value for：%
Storage and interface：Wi-fi connection
Continuous working time：200 Hours
Instrument turnning：260g
The product gross weight：
Product can be colors：black
Appearance size：163*80*35mm
1) WI-FI function
2) Finger touch screen
3) Uses magnetic and eddy current thickness measurement method can measure the magnetic metal substrate thickness of the non-conductive coating thickness of non-magnetic coating layers can be measuring non-magnetic metal substrates;
4) You can use two kinds of probes (F1, N1);
5) With two measurements: continuous measurement mode (CONTINUE) and the single measurement mode (SINGLE)；
6) Has two operating modes: direct mode (DIRECT) and group means (AB)；
7) There are five statistics: the average (MEAN), the maximum (MAX), minimum (MIN), the number of tests (NO.), standard deviation (S.DEV);
8) Both methods can be used to calibrate the instrument and basic calibration method to probe the system error correction；
9) Storage function: 500 measurements for storage；
10) Delete function: a single measure that appears suspicious data delete, delete all the data can also be stored in the region, in order to carry out new measurements；
11) Threshold Setting: measured value outside of the gauge automatic alarm；
12) Beep alerts during operation ；
13) 2 Ways for power off : Automatic and Hand movement；
|
Perfomance |
|
Measuring Range |
|
F400：0~400μm N400：0~400μm F1：0~1250μm F1/90：0~1250μm N1：0~1250μm F10：0~10000μm CN02：10~200μm |
|
Accuracy |
|
F400、N400 Probe One point calibration： （2%+0. ７） Two point calibration：±（1%+0. ７） F1、F1/90、N1、CN02 Probe One point calibration：±（2%+1） Two point calibration：±（1%+1） F10 Probe One point calibration ： ± （2%+10） Two point calibration：±（1%+10） |
|
Calibration method |
|
One point calibration / two point calibration / Basic Calibration |
|
Resolution |
|
0.1μm（0-99.9μm） 1μm （over100μm） |
|
Weight |
|
300g |
|
Working Environment |
|
Temperature ： 0 ℃ ~50 ℃ Humidity：20%～90% |
|
Operation |
|
Operation Mode |
|
Direct testing & Group testing |
|
Measuring mode |
|
Continuous measurement / single measurement |
|
Power Off |
|
Manual/Auto |
|
Operation Indecation |
|
Musical tones for error |
|
Signal Processing |
|
Limit of Threshold |
|
Auto alarm for values out of limit |
|
Signal Processing |
|
The histogram can be used to analyze a batch of measurements |
|
Stastis Function |
|
（MEAN）/（S.DEV）/（No.）/（MAX） /（MIN） |
|
Memory |
|
Thickness Values |
|
500data |
|
Delete |
|
All data within a single suspicious data / group |
|
Input/Output |
|
Communication |
| Wi-fi |
|
Electronic Power |
|
Battery |
|
Commercial NiMH / alkaline batteries 1.5V |
|
Power Indication |
|
Low Voltage indication |
|
Standard Package |
|
Main body 1 Probe(N1 or F1) 1 Calibration foil set 5 base 1 Manual 1 |
|
Optional Accesories |
|
Probe |
|
F400/ N400/ F10/ CN02/ F1/90 |
|
Probe Mode |
F400 |
F1 |
F1/90 |
F10 |
N400 |
N1 |
CN02 |
||||
|
Working Principle |
Magenetic Permeability Method |
Eddy Current Method |
|||||||||
|
Mesuring range |
0～400 |
0～1250 |
0～10000 |
0～400 |
0～1250 |
10～200 |
|||||
|
( Copper covered with chomium 0～40) |
|||||||||||
|
Resolution (mm) |
0.1 |
0.1 |
10 |
0.1 |
0.1 |
1 |
|||||
|
Tolera (mm) |
One point calibration(mm) |
±(3%H+0.7) |
±(3%H+1) |
±(3%H+10) |
±(3%H+0.7) |
±(3%H+1.5) |
±(3%H+1) |
||||
|
Tne point calibration( m) |
±(1%H+0.7) |
±((1%H+1) |
±(1%H+10) |
±(1%H+0.7) |
±（1%H+1.5） |
-------- |
|||||
|
Meas |
The minimum |
凸 |
1 |
1.5 |
Straig |
10 |
凸 |
1.5 |
3 |
Straig |
Straight |
|
uring Cond ition |
radius of curvature(mm) |
|
|
|
ht |
|
|
|
|
ht |
Only |
|
The minimum area diameter(mm) |
F3 |
F7 |
F7 |
F4 |
F4 |
F5 |
F5 |
F7 |
|||
|
The critical thickness of the matrix(mm) |
0.2 |
0.5 |
0.5 |
2 |
0.3 |
0.3 |
0.3 |
Unlimited |
|||
Standard:
Main body 1
Probe(N1 or F1) 1
Calibration foil set 5
base 1
Manual 1
|
Optional Accesories |
|
Probe |
|
F400/ N400/ F10/ CN02/ F1/90 |
Testing Probe Reference （1）
base
Coating
Organic materials and other non metallic coating (such as: paint
paint enameletc)
Cover thickness < 100mm
Cover thickness > 100mm
Such as magnetic metal iron steel etc.
Measuring Area > 30mm
F400: 0～400mm F1 : 0～1250mm
F400 :0～400mm F1 :0～1250mm
F10 :0～10mm
Measuring Area < 30mm
F400: 0～400mm
F1 : 0～1250mm
F400: 0～400mm
Such as
Measuring Area > 10mm
N400 :0～400mm
N400 0～400mm
copper
N1 :0～1250mm
N1 : 0～10mm
aluminum
Measuring Area < 10mm
N400 :0～400mm
N1 : 0～1250mm
tin etc.
N400: 0～400mm
Testing Probe Reference（2）
Probe Coating
Non magnetic metal layer (such as: chromium zinc aluminumcopper tin silver etc.)
Cover thickness < 100mm
Cover thickness < 100mm
Such as magnetic metal iron steel etc.
Measuring Area > 30mm
F400: 0～400mm F1: 0～1250mm
F400: 0～400mm F1: 0～1250mm
F10: 0～10mm
Measuring Area < 30mm
F400: 0～400mm
F400:0～400µm
F1: 0～1250mm
Such as copper aluminum tin etc.
Measuring Area > 10mm
Only for copper plating N400: 0～40mm
--------
Measuring Area < 10mm
--------
--------
Plastic non metal base
Measuring Area > 7mm
CN02: 10～200mm
CN02: 10～200mm
